Kinco FD5 Series - Chapter5 KincoServo + user guide; 5.1 Getting started; 5.1.1 Language; 5.1.2 Open and saving project files

Kinco FD5 AC series servo driver user manual
Chatper 5 Kincoservo+ user guide
52
Chapter5 KincoServo + user guide
This chapter contains information about how to use the PC software Kincoservo+
Figure 5-1 Main window of Kincoservo+
5.1 Getting started
5.1.1 Language
Language can be switched between English and Chinese via menu item Tools->Language.
5.1.2 Open and saving project files
Create a new project file via menu item File->New, or by clicking the button.
Open an existing project via menu item File->Open, or by clicking the button and selecting a .kpjt file
Save a project via menu item File->Save, or by clicking the button and saving as a .kpjt file
Note
The saved.kpjt project file only saves the Windows in the upper computer software, and cannot
save the parameters in the drive.
5.1.3 Starting communication
Click menu item Communication->Communication settings. The following window appears: