Kinco FD5 Series - Other parameter

Kinco FD5 AC series servo driver user manual Appendix II: List of Common Object Parameters
148
Other parameter
Name
CANopen
Modbus
Commend type
Data type
Description
Use internal motor
library
30410608
-
RWS
Unsigned8
0: Automatically read the motor model
from the encoder and use the
corresponding motor parameters in the
drive motor library (factory default)
1: Support the user to manually input the
motor model and use the motor
parameters corresponding to the motor
library in the driver
Device restart
2FFF0010
2F00
RW
Unsigned16
Starting the bootloader 55AA: starts the
bootloader AA55: Restarts the driver
Analog Increment
64101F10
-
RW
Integer16
Used to set the resolution of the
communication magnetoelectric encoder
to the incremental encoder resolution,
which can be set to 4000,8000, and
10000
=0: Do not simulate incremental
encoders, use the resolution of the default
motor
>0: Analog incremental encoder
resolution
Note: Multi-turn motors do not support
analog increments.