Kinco FD5 Series - Page 40

Kinco FD5 AC series servo driver user manual Chapter 3 Servo system interface and wiring
40
Table 3-20 CAN communication port pin definition
Model
RS485 plug pin definition
Driver end pin name
Driver end pin number
Connect the host
computer signal
FD425-CA-000
FD435-CA-000
FD625-CA-000
CAN_H
1
CAN_H
CAN_L
2
CAN_L
Note
The FD5-LA/CA driver has a built-in terminal resistor. When SW1 next to the X4 port is set to ON, the terminal
resistor is turned on.