Knick Stratos Multi E401N - Product Range and Options

Stratos Multi E401N
12
2.2 Product Range and Options
Version Possible combinations
1-channel (basic unit) 1x Memosens sensor
1x SE740 optical oxygen sensor
1x analog sensor via measuring module (MK module)
2-channel 2x Memosens sensors (1x via MK module)
1x Memosens sensor (MK module)
and 1x SE740 optical oxygen sensor
1x Memosens sensor
and 1x analog sensor via measuring module (MK module)
1x CC measuring module for dual conductivity measurement
The transmitters have the designations E401N for safe areas.
Product Line
Device (digital basic unit) Order No.
Stratos E401N E401N
Measuring module for analog sensors or 2-channel Memosens,
non-intrinsically safe
Order No.
pH value, ORP measurement MK-PH015N
Oxygen measurement MK-OXY046N
Contacting conductivity measurement (process-wetted) MK-COND025N
Toroidal conductivity measurement MK-CONDI035N
Dual conductivity measurement MK-CC065N
Memosens multiparameter (for 2-channel version) MK-MS095N
The following add-on functions (TAN options) can be enabled by entering a TAN:
Add-on function (TAN option) Order No.
pH buffer table: Entry of individual buffer set FW-E002
Current characteristic FW-E006
Concentration determination for use with conductivity sensors FW-E009
Oxygen measurement in low oxygen concentrations FW-E015
Operation with double high-impedance pH sensors FW-E017
Calculation blocks FW-E020
HART FW-E050
Current input FW-E051
Current outputs 3 and 4 FW-E052
Parameter sets 1 to 5 FW-E102
Measurement recorder FW-E103
Logbook, in conjunction with Data Card FW-E104
Firmware update FW-E106
Mounting accessories Order No.
Pipe-mount kit ZU0274
Panel-mount kit ZU0738
Protective hood ZU0737
M12 socket for sensor connection
with Memosens cable/M12 connector
ZU0860