Knick Stratos Multi E401N - System Control

To Next Page

To Previous Page

Stratos Multi E401N

5.3 System Control

Submenus Description

Memory Card This option is shown if a Data Card is inserted:

Settings for logbook and measurement recorder data recording. Decimal separation

can be set. The memory card can be formatted.

Transfer Configuration If a Data Card is inserted, the measuring device’s configuration can be saved and

transferred to another measuring device. ➜

Transfer Configuration, p. 44

Parameter Sets Two parameter sets (A, B) are available in the device. If a Data Card is inserted, up to

five parameter sets can be saved on or loaded from the Data Card.

➜

Parameter Sets, p. 45

Function Control Allocation of functions for activation by softkey or optocoupler input OK1.

➜

Function Control, p. 46

Calculation Blocks TAN option FW-E020: Convert available process variables to new

variables.➜

Calculation Blocks (TAN Option FW-E020), p. 46.

Time/Date

Define date and time format; input of date, time, and weekday. ➜ Time/Date, p. 46

Meas. Point Description Free input of a tag number and notes; can be retrieved in the Diagnostics menu.

➜

Measuring Point Description, p. 46

Firmware Update This option is shown if a FW Update Card is inserted. TAN option FW-E106: Firmware

update with FW Update Card. ➜

Firmware Update (TAN Option FW-E106), p. 46

Enable Options Activation of add-on options via TAN. The TAN is only valid for the Stratos Multi with

the associated serial number. ➜

Option Activation, p. 47

Logbook Select events to be logged (failure/maintenance required); can be retrieved in the Di-

agnostics menu. ➜

Logbook, p. 47

Buffer Table TAN option FW-E002: Specification of a buffer set.

➜

pH Buffer Table: Entry of Individual Buffer Set (FW-E002), p. 199

Concentration Table TAN option FW-E009: Specification of a concentration solution for conductivity mea-

surement. ➜

Concentration Determination (FW-E009), p. 201.

Restore Factory Settings

Restore all parameters to factory settings. ➜ Restore Factory Settings, p. 48

Passcode Entry

Change passcodes. ➜ Passcode Entry, p. 48