Knick Stratos Multi E401N - Restore Factory Settings; Parameter Setting, General

Stratos Multi E401N
48
5.3.12 Concentration Table (TAN Option FW-E009)
The menu is only shown if the TAN option is activated.
Parameter Setting

System Control

Concentration Table
See also
➜ Concentration Determination (FW-E009), p. 201
5.3.13 Restore Factory Settings
Allows the parameters to be reset to their factory settings:
Parameter Setting

System Control

Restore Factory Settings
NOTICE! All individual parameter settings will be overwritten with the factory settings.
5.3.14 Passcode Entry
Passcodes (factory setting)
Calibration 1147
Maintenance 2958
Operator Level 1246
Administrator Level 1989
The passcodes can be changed or deactivated in the Passcode Entry submenu:
Parameter Setting

System Control

Passcode Entry
Note: The passcode for the Administrator level cannot be deactivated.
Note: If you lose the administrator passcode, system access is locked! The manufacturer can generate
a rescue TAN. If you have any questions, please contact Knick Elektronische Messgeräte GmbH & Co.
KG using the information provided on the last page of this document.
5.4 Parameter Setting, General
Note: Function check (HOLD) is active.
Submenus Description
Language User interface language: German (factory setting), English, French, Italian, Spanish,
Portuguese, Chinese
Units/Formats Temperature unit °C (factory setting) or °F.
Other units and formats depending on the selected process variable,
e.g., pressure in mbar, kPa, psi
Display format pH xx.xx or xx.x
Measurement Display
Values to be displayed (up to 8) ➜ Configuring the Measurement Display, p. 49
Display
Display color, brightness, and display auto-off (factory setting: None) ➜ Display, p. 54
Measurement Recorder TAN option FW-E103: Logging of measured and additional values
➜
Measurement Recorder (FW-E103), p. 211