Knick Stratos Multi E401N - Configuring the Measurement Display

Stratos Multi E401N
49
5.4.1 Configuring the Measurement Display
Parameter Setting

General

Measurement Display
01. Set the number of values to be displayed:
2 values (1 channel), 2 values (2 channels), 4 values (2 channels),
2 values, 4 values, 6 values, 8 values
02. As required, assign channels and variables to be displayed.
03. Confirm with enter.
Measurement Display, Example with 2 Values
Selection Result
Selection of any two variables:
2 Values
I
I
Number
1st Value
2nd Value
pH Value
Temperature
pH Value
Temperature
2 Values (1 Channel)
2 Values (2 Channels)
4 Values (2 Channels)
4 Values
2 Values
Select number of values.
Confirm with enter
.
2 Values
pH Value
Temperature
I
I
Number
1st Value
2nd Value
I
I
II
II
I
pH Value
ORP
Temperature
rH Value
pH Voltage
Select first variable.
Confirm with enter
.
2 Values
pH Value
Time
I
Number
1st Value
2nd Value
Current Output 1
Dig. Controller Output
Current Input
Date
Time
Select second variable.
Confirm with enter
.
Set further parameters with the left softkey: Back
.
End parameter setting with the right softkey: Back to
Meas..
I
Favorites MenuMenu
pH
7.08
14:03
1
2
(1) First value
(2)
Second value