2-7
bizhub PRESS C71cf
2
NOTICE
When turning ON the winding motor, make sure that there is no slack on the media. Slacks may result in media
being torn.
I When the machine is ready to print, the LEDs displayed under Roll Winder RW-101
and Roll Winder RW-201 on the [MACHINE] screen on the touch panel of the main
body light in blue. The message [Ready to print] also appears.
[Start cond. Wind met] and [Start cond. Paper feed met] are displayed in green on the touch panel of
Roll Winder RW-201.
To Next Page
Loading...
