Korg microSTATION - Page 65

Saving & loading data Loading data
61
Loading data from media
(Media-Load)
Loading all programs, combinations, drum
kits, and arpeggio patterns
Here’showalldatafroma.PCGfilecontaining
programs,combinations,drumkits,globalsettings,
anduserarpeggiopatternscanbeloadedinasingle
operation.
Inordertoloadprograms,combinations,songs,
drumkits,oruserarpeggiopatterns,youmustfirst
makesurethatth e Global/Mediamodememory
protectsettingisoff.(p. 59“Mem
oryprot ect”)
Note: Fordetailsonthemediafromwhichdatacanbe
loaded,pleaserefertop. 60.
1. Makesurethatthemediaisreadyforloading.
(p. 60“Inserting/removingacardintheSDcard
slot”)
2. ChooseGLOBAL/MEDIA:Media‐Load,Load
PCG,andthenpressthebutton.
ThePCGfilesonthemediawillbedisplayed.
3. Usethebuttonstoselectthe.PCGfilethat
containstheprogramorcombinationdatayou
wanttoload,andthenpressthebutton.
4. ChooseAllPCG,andpressthebutton.
Thedisplaywillindicate“OK?”
5. TobegintheLoadoperation,pressthebutton.
All
dataofthe.PCGfilewillbeloadedintothe
microSTATION.
Neverremovethemediawhiledataisbe ing
loaded.
Note: Youcanalsoloadprogramsorcombinationsby
bank.PleaserefertoPGp. 68.
Loading individual items from a PCG file
ThemicroSTATIONalsoallowsyoutoloadindividual
itemsorbanksofprogram,combination,drumkit,or
userarpeggiopatterndata.Thisisaconvenientwayto
rearrangecombinationsintotheorderinwhichyou’ll
beplayingthemlive.
Beaw arethateditingaprogram willaffectthe
soundofanycombinationthatusesthatpr
ogram.
Asanexample,he
re’showonecombinationthatwas
savedinbankAcanbeloadedintoC127.
1. ChooseGLOBAL/MEDIA:Media‐LoadPCG.
2. SelectthePCGfilethatcontainsthecombination
youwanttoload,andthenpressthebutton.
3. FromthePCGfile,choose“Combinations”and
pressthebutton.
•Fromthecombinations,choose“BankA”andpress
thebutton.
•FrombankA,choosethecombinationthatyou
wanttoload,andpressthebutton.
Note: Whenyouplaythekeyboard,you’llhearthe
selectedcombination.However,eachtimbrewill
soundusingthecorrespondinginternalprogram.
4. ChooseC127astheload‐destination,andpressthe
butto
n.
Thedisplaywillask“OK?”
5. Toloadthedata,pressthebutton.
TheselectedcombinationofbankAwillbeloaded
intoC127.
6. InCombinationmode,setthecategorytoALL,
turnNumLockon,andspecify384toselect
combinationC127.
Not
e: Theba
nkandnumberareshownintheupper
rightofthedisplayintheCOMBIPLAYpagewhen
youturnNumLockonandpressthe14(ENTER)
button.
Loading a song (.SNG) for use in Sequencer
mode
Inthisexample,we’llexplainhowtoloadasong.
Wewillassumethatthissongusesprograms,drum
kits,anduserarpeggiopatternsthatyou’veedited.If
thisisthecase,it’sbesttoloadalldata.
1. Asdescribedin“Loadingallprograms,
combinations,drumkits,andarpeggio
patterns” (p. 61),loadthePCGfilethatisused
bythe.SNGfile
you’regoingtoload.
2. InGLOBAL/MEDIA:Media‐Load,chooseLoad
SNG.