52
The lower line shows part of the program name used by the
track. For GM2 variation banks or the GM2 drums bank, the
variation bank (1)–(9) or drums bank (d) will be shown.
1.1–2(3)c: Track Infomation
Track Infomation
This shows the currently selected track, program bank,
number, name, and MIDI channel.
■ 1.1–2(3)d: UTILITY
☞ “Memory Status,” “Rename Multi,” “Delete Multi,”
“Copy From Multi,” “Copy From Combi,” “Load Tem-
plate Multi,” “Save Template Multi,” “Rename
Track,”“GM Initialize”(1.1–1c)
Select by Category
You can select the program for each track by category. This
command can be selected when a Program page (Prog..8,
Prog..16) is displayed. (
☞PROG 1.1–1a)
1.1–4: Mix..8 (Mixer T01...08)
1.1–5: Mix..16 (Mixer T09...16)
Here you can set the pan and volume of each track.
1.1–4(5)a: Pan, Volume
Pan [RND, L001...C064...R127]
Sets the pan of tracks 1–16.
L001...C064...R127: A setting of L001 is far left, and R127 is
far right. A setting of C064 will reproduce the pan setting of
the oscillator in Program mode.
GM Initialize Parameters
1.1–4a
1.1–4b
OSC1: Amp1 Pan=L001
OSC2: Amp2 Pan=R127
Left
Center
Right
Pan (CC#10)
C064
Left
Center
Right
L032
L001
R096
R127
Left
Center
Right
Left
Center
Right
OSC1
OSC2
OSC1: Amp1 Pan=L032
OSC2: Amp2 Pan=R096
Pan (CC#10)
C064
L032
L001
R096
R127
OSC1: Amp1 Pan=C064
OSC2: Amp2 Pan=C064
Left
Center
Right
Pan (CC#10)
C064
Left
Center
Right
L032
L001
R096
R127
OSC1
OSC2
Parameter Track1–9, 11–16 Track10
1.1 Program Select G001:Acoustic Piano g(d)001:STANDARD Kit
Pan C064 C064
Volume 100 100
3.1 Status ––The setting remains unchanged
3.2 Use Program’s Scale ––The setting remains unchanged
6.1 Arpeggiator Assign ––The setting remains unchanged
Other Arpeggiator parameters ––The setting remains unchanged
7.1 IFX/Indiv.Out BUS Select L/R DKit
Send1(MFX1) 0 0
Send2(MFX2) 40 40
7.2 IFX1–5 ––The setting remains unchanged
Pan(CC#8) ––The setting remains unchanged
BUS Select ––The setting remains unchanged
Send1 ––The setting remains unchanged
Send2 ––The setting remains unchanged
Other Insert Effect parameters ––The setting remains unchanged
7.3 MFX1 ––016: St.Chorus
MFX2 ––053: Rev Smth. Hall
Return1 ––127
Return2 ––050
Other Master Effect and Master EQ parameters – – Default settings