2
In this display page you can select and play programs.
All MIDI data in PROG 1.1: Play is transmitted and
received on the Global MIDI Channel (
☞GLOBAL 2.1–
1a).
1.1–1: Program
1.1–1a: Bank, Program Select, Category, Cat. Hold,
10’s Hold,
Bank (Bank Select)
[INT-A…INT-F, G, g(1)...g(9), g(d), EXB-A...EXB-H]
This is the program bank display.
Use the [BANK], [A]–[H] keys to select the bank.
To select programs from internal banks INT-A–g(d), press
the [BANK] key to make the INT/EXB indicator go dark,
and use the [A]–[G] keys to select the bank.
For bank G, the following banks will be selected succes-
sively each time you press the BANK [G-GM] key.
G→g(1)→g(2)→g(3)→g(4)→g(5)→g(6)→g(7)→g(8)→g(9)→
g(d)→G
Bank INT-F can be selected if you have installed the
separately sold EXB-MOSS option. When installed, the
128 EXB-MOSS programs will be available.
To select programs from external banks EXB-A–EXB-H,
press the [BANK] key to make the INT/EXB indicator light,
and use the [A]–[H] keys to select the bank.
Banks EXB-A–H are normally used when a separately
sold EXB-PCM series option is installed.
The program area consists of several banks. INT-A–E and
EXB-A–H each contain 128 programs (total 1,664), which
can be overwritten (RAM). Additionaly, there is a non-
rewritable (ROM) bank, G (containing GM2 capital pro-
grams, banks g(1)–g(9)[variation programs], and bank g(d)
[drums]). (For a list of the factory-set programs, refer to the
separate VNL.)
* For banks with no variation sounds, the GM basic sounds
will be recalled. (An * will be added at the beginning of
the program name.)
Program Select [(I-A…I-F, E-A...E-H)0…127: name,
(G…g(d))1…128: name]
Selects a program. Choose this parameter, and use the
[INC], [DEC] keys, numeric keys [0]–[9], and the [VALUE]
dial to select a program.
You can select programs by category, or by using “10’s
Hold.” (
☞“Category,” “Cat. HOLD,” “10’s HOLD”)
You can also select a program by sending a MIDI pro-
gram change from a connected external MIDI device.
(
☞p.221)
Category [00...15: Name]
Selects the program category.
All programs are classified into one of sixteen categories.
You can select the desired category, and then choose pro-
grams from that category.
For the procedure of selecting programs from a category,
refer to “Cat. HOLD” and “Select by Category.”
To assign a category to each program, use the “Write
Program” (1.1–1d) dialog box. To change the name of a
category, use “Category Name Prog. 00–07, 08–15”
(
☞GLOBAL 4.1–1/2).
Cat. HOLD (Category Hold)
1 Press the [./HOLD] key to display . The cate-
gory will be held (fixed ).
2 Use “Category” to select the desired category.
3 Choose “Program Select,” and use the [INC], [DEC] keys
or the [VALUE] dial to select programs sequentially
within the specified category.
4 To cancel, press the [./HOLD] key twice to turn off the
display.
If you press the [./HOLD] key in PROG 1.1: Play, the
selection will cycle in the order of →
→ Cancel.
Select by Category
1 Press the [F8] (“UTILITY”) key to access the Utility
menu.
2 Press the [F7] key or the [ ], [ ] keys to choose “Select
by Category,” and then press the [F8] key. The Select Pro-
gram by Category dialog box will appear. The programs
in that category will be shown in the framed list.
3 Select “Cat,” and use the [INC], [DEC] keys or [VALUE]
dial to choose the category that includes the program you
wish to select.
4 Use the [ ], [ ] keys to select a program from the list.
Alternatively, you can use the [ ], [ ] keys to select
“Index,” and use the [INC], [DEC] keys or [VALUE] dial
to make your selection.
At this time, you can play the keyboard etc. of a con-
nected MIDI device to hear the selected sound.
5 Press the [F8] (“OK”) key to finalize your selection, or
press the [F7] (“Cancel”) key to cancel your selection.
10’s HOLD
1 Press the [./HOLD] key to display .
The ten’s place of the program number will be held
(fixed).
PROG 1.1: Play
INT-A...INT-D (I-A...I-D) for preloaded programs
INT-E (I-E) User programs, such as programs
that use multisamples created in
Sampling mode.
INT-F (I-F) (for EXB-MOSS programs)
G GM2 capital program
g(1)–g(9) GM2 variation programs*
g(d) GM2 drums program
EXB-A...EXB-H (E-A...E-H) (for user programs, and EXB-PCM
series programs)
1.1–1a
1.1–1b
1.1–1c 1.1–1d
To Next Page
Loading...
Need help?
General
