124
In Disk mode you can press the [F1]–[F4] keys located below
the tab to select the desired page.
Here you can load a selected file or directory into internal
memory.
Use the [F5] (“UP”) key and [F6] (“OPEN”) key to select the
desired file or directory. Then use the Utility “Load selected”
(1.1–1f) to select and load the data.
1.1–1a: Current directory
The directory currently selected for processing is referred to
as the “current directory.”
The LCD screen will show the full path name of the direc-
tory. A slash “/” character is used as the delimiter between
directory levels. To change the current directory, use the [F5]
(“UP”) key and [F6] (“OPEN”) key.
1.1–1b: Directory window
Directory window
File information for the current directory is shown here.
You can select a file or directory in this window.
b1: File/icon
The icon indicates the type of file.
For details on icons,
☞p.123.
b2: File name
This is the name of the file (DOS file).
If the Utility “Translation” (1.1–1f) is checked, the DOS file-
name of a .KMP (Korg multisample parameter) file or .KSF
(Korg sample file) that is loaded will be replaced in the dis-
play by the multisample name or sample name that you
specified in Sampling mode.
b3: Size
This is the size of the file (in bytes).
b4: Save date and time
This shows the date and time when the file was saved. From
the left, this is shown as day, month, year, hours and min-
utes.
However since the TRITON-Rack does not contain an inter-
nal calendar or clock, you must use “Set Date/Time” (1.1–
3a) to set the date and time before saving the file.
b5: File index
This displays the file index.
1.1–1c: Drive select
Selects the device (floppy disk or hard disk etc.) that will be
used for loading and saving.
When you press the [SELECT], [ARP ON/OFF], [AUDI-
TION], [DEMO/SNG] key or any key other than a mode key
to make the TRITON-Rack recognize media (floppy disk,
hard disk etc.), the volume label of that media will be dis-
played. For media that has no volume label, the display will
indicate “no label.” For unformatted media, the display will
indicate “Unformatted.”
If the EXB-SCSI option is not installed, only the floppy disk
can be selected.
1.1–1d: File select
The file/directory selected in the directory window will be
shown in “Index:” The total number of files in the current
directory is shown in “(/).”
Use the [ ], [ ] keys to choose File Select, and use the
numeric keys to directly select the file or directory to be
edited.
■ 1.1–1e: UP, OPEN
Select the current directory.
Use the [F5] (“UP”) key and [F6] (“OPEN”) key to select the
current directory.
: Move to the higher directory.
: Move to a lower directory.
■ 1.1–1f: UTILITY
For details on how to select the desired utility function, refer
to “PROG 1.1–1d: UTILITY.”
Hide unknown file
Select “Hide unknown file” in the utility menu and press the
[F8] key. A check mark will appear at the left of “Hide
unknown file.” With this setting, undefined files will not be
displayed in the directory window. However, this is effec-
tive only if the current directory is a DOS directory.
Translation
Select “Translation” in the utility menu and press the [F8]
key. A check mark will appear at the left of “Translation.”
With this setting, .KMP (Korg multisample parameter) files
and .KSF (Korg sample file) DOS file names will be dis-
played as the multisample name or sample name used in
Sampling mode etc.
DISK PAGE MENU
Load Load the contents of the selected file or directory
into internal memory. (
☞p.124)
Save Save various from internal memory to disk or
other media. (
☞p.133)
Utility Rename, copy, or delete a selected disk or file,
create a new directory, or specify the date and
time. (
☞p.136)
Media Information View information on the selected media.
(
☞p.138)
1.1–1: Load
1.1–1a
1.1–1b
1.1–1c
1.1–1f1.1–1e1.1–1d
b5 b1 b2 b3 b4
To Next Page
Loading...
