Krone 1022623 - Page 154

15 Terminal menus
15.20 Menu 15 "Settings"
154
Comprima F 155
Original Operating Instructions 150001049_01_en
Diagnostics for digital actuators
2
state:
K01
K03
15-2
EQG000-019
Errors are only displayed if the actuator is turned on and a test for the actuator in question is
available. The LED on the plug can also be checked directly on the actuator.
 Press
to switch the actuator on.
 Press
to switch the actuator off.
Diagnostics of actuator for wrapping process
2
state:
15-2
Q30
M01
M1
EQG000-053
The actuator for wrapping process M01 can be tested by moving it into the feed or cutting
position.
 To move the actuator for wrapping process into the feed position, press
.
 To move the actuator for wrapping process into the cutting position, press
.