KTM 1190 RC8 R User Manual

6 CONTROLS 101
– Press the button briefly and repeatedly until the symbol shows BACK... in the info
display.
– Press the MODE button briefly.
– Press the button briefly and repeatedly until the symbol shows EXIT SETUP in the
info display.
– Press the MODE button briefly.
6.13.54 Setting the fuel reserve display TRIP F RESET
Condition
The ignition is on.
The motorcycle is stationary.
400463-01
– Press the button and the button for 3 - 5 seconds.
– Press the button twice until the symbol shows SETTINGS in the info display.
– Press the MODE button briefly.
– Press the button three times until the symbol shows TRIP F RESET in the info dis-
play.
– Press the MODE button briefly.
TRIPF RESET appears in the info display with the reaction time.
Info
At delivery, TRIPF RESET is set to 300 seconds.
– Set the reaction time of the fuel reserve display with the button or the button.
Info
You can set the TRIPF RESET to between 10 and 1000 seconds in steps of 10.
– Press the MODE button briefly.
The settings are stored and the display changes to the SETTINGS menu.

KTM 1190 RC8 R Specifications

General

Displacement	1195 cc
Bore x Stroke	105 mm x 69 mm
Compression Ratio	13.5:1
Transmission	6-speed
Rear Suspension	WP Monoshock
Fuel Tank Capacity	16.5 liters
Dry Weight	184 kg
Fuel System	Electronic fuel injection
Engine Type	V-twin, 4-stroke
Power	129 kW (175 hp) @ 10, 250 rpm
Torque	123 Nm @ 8, 000 rpm
Frame	Chromium-Molybdenum trellis frame, powder coated
Front Brake	2 x Brembo four-piston calipers, 320 mm discs
Rear Brake	220 mm disc, 2-piston caliper
Seat Height	805 mm