KTM 1190 RC8 R User Manual

22 ENGINE CONTROL BLINK CODE 248
Blink code EFI warning lamp (MIL)
02 EFI warning lamp (MIL) flashes 2x short
Error level condition Crankshaft position sensor - circuit fault
Blink code EFI warning lamp (MIL)
06 EFI warning lamp (MIL) flashes 6x short
Error level condition Throttle position sensor circuit A - input signal too low
Throttle position sensor circuit A - input signal too high
Blink code EFI warning lamp (MIL)
07 EFI warning lamp (MIL) flashes 7x short
Error level condition Throttle position sensor circuit B - input signal too low
Throttle position sensor circuit B - input signal too high
Blink code EFI warning lamp (MIL)
09 EFI warning lamp (MIL) flashes 9x short
Error level condition Manifold absolute pressure sensor cylinder 1 - input signal too low
Manifold absolute pressure sensor cylinder 1 - input signal too high
Blink code EFI warning lamp (MIL)
11 EFI warning lamp (MIL) flashes 1x long, 1x short
Error level condition Manifold absolute pressure sensor cylinder 2 - input signal too low
Manifold absolute pressure sensor cylinder 2 - input signal too high

KTM 1190 RC8 R Specifications

General

Displacement	1195 cc
Bore x Stroke	105 mm x 69 mm
Compression Ratio	13.5:1
Transmission	6-speed
Rear Suspension	WP Monoshock
Fuel Tank Capacity	16.5 liters
Dry Weight	184 kg
Fuel System	Electronic fuel injection
Engine Type	V-twin, 4-stroke
Power	129 kW (175 hp) @ 10, 250 rpm
Torque	123 Nm @ 8, 000 rpm
Frame	Chromium-Molybdenum trellis frame, powder coated
Front Brake	2 x Brembo four-piston calipers, 320 mm discs
Rear Brake	220 mm disc, 2-piston caliper
Seat Height	805 mm