KTM 1190 RC8 R User Manual

23 TECHNICAL DATA 254
23.1 Motor
Design 2-cylinder 4-stroke Otto engine, 75° V arrangement, water-cooled
Displacement 1,195 cm³ (72.92 cu in)
Stroke 69 mm (2.72 in)
Bore 105 mm (4.13 in)
Compression ratio 13.5:1
Control DOHC, 4 valves per cylinder, chain-driven
Valve - valve stem diameter
Intake 42 mm (1.65 in)
Exhaust 34 mm (1.34 in)
Valve clearance
Exhaust at: 20 °C (68 °F) 0.25… 0.30 mm (0.0098… 0.0118 in)
Intake at: 20 °C (68 °F) 0.10… 0.15 mm (0.0039… 0.0059 in)
Crankshaft bearing Sleeve bearing
Conrod bearing Sleeve bearing
Piston pin bearing No bearing bushes - DLC-coated piston pins
Piston Forged light alloy
Piston ring 1 upper compression (rectangular) ring, 1 lower compression ring,
1 oil scraper ring
Engine lubrication Dry sump lubrication system with three rotor pumps
Primary transmission 40:76
Clutch antihopping clutch in oil bath/hydraulically operated
Transmission 6-speed claw gears
Transmission ratio

KTM 1190 RC8 R Specifications

General

Displacement	1195 cc
Bore x Stroke	105 mm x 69 mm
Compression Ratio	13.5:1
Transmission	6-speed
Rear Suspension	WP Monoshock
Fuel Tank Capacity	16.5 liters
Dry Weight	184 kg
Fuel System	Electronic fuel injection
Engine Type	V-twin, 4-stroke
Power	129 kW (175 hp) @ 10, 250 rpm
Torque	123 Nm @ 8, 000 rpm
Frame	Chromium-Molybdenum trellis frame, powder coated
Front Brake	2 x Brembo four-piston calipers, 320 mm discs
Rear Brake	220 mm disc, 2-piston caliper
Seat Height	805 mm