KTM 1190 RC8 R User Manual

15 COOLING SYSTEM 224
Condition
The engine is cold.
The radiator is completely full.
B01333-01
– Rest the motorcycle on its side stand on a horizontal surface.
– Check the coolant level in the compensating tank.
The coolant level must be between MIN and MAX.
» If there is no coolant in the compensating tank:
– Check the cooling system for leaks.
Info
Do not start up the motorcycle!
– Add coolant/bleed the cooling system.
» If the coolant in the compensating tank is not at the required level, but the tank is
not empty:
– Check the cooling system for leaks.
– Fill the cooling system compensating tank. ( p. 224)
15.3 Filling cooling system compensating tank
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
– Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.

KTM 1190 RC8 R Specifications

General

Displacement	1195 cc
Bore x Stroke	105 mm x 69 mm
Compression Ratio	13.5:1
Transmission	6-speed
Rear Suspension	WP Monoshock
Fuel Tank Capacity	16.5 liters
Dry Weight	184 kg
Fuel System	Electronic fuel injection
Engine Type	V-twin, 4-stroke
Power	129 kW (175 hp) @ 10, 250 rpm
Torque	123 Nm @ 8, 000 rpm
Frame	Chromium-Molybdenum trellis frame, powder coated
Front Brake	2 x Brembo four-piston calipers, 320 mm discs
Rear Brake	220 mm disc, 2-piston caliper
Seat Height	805 mm