KTM 1190 RC8 R - Adjusting the Shift Speed RPM1;2

6 CONTROLS 97
The motorcycle is stationary.
400455-01
– Press the button and the button for 3 - 5 seconds.
– Press the button once until the symbol shows SET CLOCK in the info display.
– Press the MODE button briefly.
The hour is shown.
– Set the hour with the button or the button .
– Press the MODE button briefly.
The minutes are shown.
– Set the minutes with the button or the button .
– Press the MODE button briefly.
The settings are stored and the display changes to the SET‑UP menu.
– Press the button briefly and repeatedly until the symbol shows EXIT SETUP in the
info display.
– Press the MODE button briefly.
6.13.51 Adjusting the shift speed RPM1/2
Condition
The ignition is on.
The motorcycle is stationary.