KTM 1190 RC8 R - LAP Button Blank Time, LAP BLANK TIME Menu

6 CONTROLS 73
Press the MODE but-
ton for 3 - 5 sec-
onds.
Open and exit SHIFT RPMS or change to the next value
Press the MODE but-
ton briefly.
Open and exit SHIFT RPMS or change to the next value
6.13.32 LAP button blank time, LAP BLANK TIME menu
401168-01
Condition
Alternative 1
• The ignition is on.
• The motorcycle is stationary.
• ROAD mode
Alternative 2
• The ignition is on.
• The motorcycle is stationary.
• RACE mode
– Press the button and the button for 3 - 5 seconds.
– Press the button twice until the symbol shows SETTINGS in the info display.
– Press the MODE button briefly.
– Press the button once until the symbol shows LAP BLANK TIME in the info display.
– Press the MODE button briefly.
In the LAP BLANK TIME menu, you set the lap blank time of the LAP button.
Press the button . Increases the value
Press the button . Decreases the value
Press the button
and the button for
3 - 5 seconds.
No function