11 SERVICE WORK ON THE CHASSIS 169
11.5 Bleeding fork legs
Preparatory work
– Lean the motorcycle on the side stand.
100684-10
Main work
–
Release bleeder screws
.
Any excess pressure escapes from the interior of the fork.
– Tighten the bleeder screws.
Info
Perform this action on both fork legs.
11.6 Removing the seat
B01308-11
–
Insert the ignition key in the seat lock
and turn it clockwise.
– Raise the rear of the seat, push it towards the rear, and remove it upwards.
To Next Page
Loading...
