10 TUNING THE CHASSIS 137
10.7 Adjusting the high-speed compression damping of the shock absorber
Caution
Danger of accidents Disassembly of pressurized parts can lead to injury.
– The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop will
be pleased to help.)
Info
The high-speed setting can be seen during the fast compression of the shock absorber.
B00574-10
–
Turn adjusting screw
clockwise all the way using a socket wrench.
Info
Do not loosen nut
!
– Turn counterclockwise by the number of turns corresponding to the shock absorber
type.
Guideline
Compression damping, high-speed
Comfort 3 turns
Standard 2.5 turns
Sport 1.5 turns
Full payload 1.5 turns
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damping.
To Next Page
Loading...
