KTM 1190 RC8 R - Adjusting the Mapping of the Engine Electronics ENGINE MAP

6 CONTROLS 94
6.13.46 Adjusting the mapping of the engine electronics ENGINE MAP
Note
Material damage Incorrect mapping damages the engine.
– Adjust the mapping of the engine electronics for the fuel quality currently in use.
Condition
The ignition is on.
The motorcycle is stationary.
401134-01
Condition
ROAD mode
– Press the MODE button briefly and repeatedly until ENGINE MAP appears in the info
display.
– Press the MODE button for 3 - 5 seconds.
– Select the mapping with the button or the button .
– Press the MODE button for 3 - 5 seconds.
The setting is stored.
401148-01
Condition
RACE mode
– Press the MODE button briefly and repeatedly until ENGINE MAP appears in the info
display.
– Press the MODE button for 3 - 5 seconds.
– Select the mapping with the button or the button .
– Press the MODE button for 3 - 5 seconds.
The setting is stored.