KTM 1190 RC8 R - Changing the High Beam Bulb

14 ELECTRICAL SYSTEM 215
14.7 Changing the high beam bulb
Note
Damage to reflector Reduced brightness.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
– Switch off all power consumers and the engine.
B01332-10
Main work
–
Remove screws

. Remove the cover.
100746-10
–
Push latch

in the direction of the arrow.
–
Remove the lamp cover

.