KTM 1190 RC8 R - Adjusting the Play in the Throttle Cable

16 TUNING THE ENGINE 227
16.2 Adjusting the play in the throttle cable
B01334-10
– Move the handlebar to the straight-ahead position.
– Throttle position sensor circuit A - check in zero position.
Info
It is imperative to use the KTM diagnostics tool for this.
–
Push back protection cap

.
–
Unscrew lock nut

.
–
Set the play in the throttle cable by turning adjusting screw

.
Guideline
Throttle cable play 3… 5 mm (0.12… 0.2 in)
–
Tighten lock nut

.
– Mount the protection cap.