KTM 1190 RC8 R User Manual

19 STORAGE 241
19.1 Storage
Info
If you want to garage the motorcycle for a longer period, take the following actions.
Before storing the motorcycle, check all parts for function and wear. If service, repairs or replacements are necessary, you should
do this during the storage period (less workshop overload). In this way, you can avoid long workshop waiting times at the start of the
new season.
401058-01
– When refueling for the last time before taking the motorcycle out of service, add fuel
additive.
Fuel additive ( p. 272)
– Fill up with fuel. ( p. 127)
– Clean the motorcycle. ( p. 238)
– Change the engine oil and filter, clean the oil screen. ( p. 228)
– Check the coolant level. ( p. 223)
– Check the antifreeze.
– Check the tire pressure. ( p. 200)
– Remove the battery. ( p. 202)
– Recharge the battery. ( p. 205)
Guideline
Storage temperature of battery without
direct sunshine.
0… 35 °C (32… 95 °F)
– Store the vehicle in a dry location that is not subject to large fluctuations in tempera-
ture.
Info
KTM recommends raising the motorcycle.

KTM 1190 RC8 R Specifications

General

Displacement	1195 cc
Bore x Stroke	105 mm x 69 mm
Compression Ratio	13.5:1
Transmission	6-speed
Rear Suspension	WP Monoshock
Fuel Tank Capacity	16.5 liters
Dry Weight	184 kg
Fuel System	Electronic fuel injection
Engine Type	V-twin, 4-stroke
Power	129 kW (175 hp) @ 10, 250 rpm
Torque	123 Nm @ 8, 000 rpm
Frame	Chromium-Molybdenum trellis frame, powder coated
Front Brake	2 x Brembo four-piston calipers, 320 mm discs
Rear Brake	220 mm disc, 2-piston caliper
Seat Height	805 mm