14 ELECTRICAL SYSTEM 213
100743-10
–
Push latch
in the direction of the arrow.
–
Remove the lamp cover
.
700295-01
–
Unplug connector
.
–
Push off the retaining clamp
on both sides, squeeze and fold to the side.
–
Remove headlight bulb
.
700296-01
– Position the new headlight bulb in the headlight housing.
Guideline
Insert the headlight bulb so that lug
is positioned in the cut-out.
Low beam / high beam (H7 / base PX26d) ( p. 261)
– Position the retaining clamp.
– Plug in the connector.
To Next Page
Loading...
