6 CONTROLS 59
If an R appears after TOPSPEED, the stopwatch is running in the background.
If a P appears after TOPSPEED, the stopwatch in the background is active but waiting for a
speed signal. The time is not running.
This function is controlled with the LAP button.
LastLap shows the maximum speed of the last lap.
±Last shows the maximum speed difference between the last lap and the lap before.
±Best shows the maximum speed difference between the last lap and the highest maximum
speed.
If the last lap was the lap with the highest maximum speed, the info display shows ±Best:
Best!
Press the button . No function
Press the button . No function
Press the button
and the button for
3 - 5 seconds.
The display changes to the SET‑UP menu
Press the MODE but-
ton for 3 - 5 sec-
onds.
The display of LastLap, ±Last and ±Best are set to 0
Press the MODE but-
ton briefly.
Next display mode
To Next Page
Loading...
