Lantronix SLC 8000

8: Device Ports
SLC™ 8000 Advanced Console Manager User Guide 154
Internal Modem Commands
Configure the internal modem:
set intmodem <parameters>
Parameters
auth <pap|chap>
calleridcmd <Modem Command String>
calleridlogging <enable|disable>
modemstate <disable|dialin|dialout|dialback>
usesites <enable|disable>
modemmode <text|ppp>
group <Local or Remote Group Name>
timeoutlogins <disable|1-30 minutes>
modemtimeout <disable|1-9999 sec>
localipaddr <negotiate|IP Address>
restartdelay <PPP Restart Delay>
remoteipaddr <negotiate|IP Address>
chaphost <CHAP Host or User Name>
initscript <Modem Init Script>
nat <enable|disable>
chapauth <chaphost|localusers>
checkdialtone <disable|5-600 min>
dialbacknumber <usernumber|Phone Number>
dialoutnumber <Phone Number>
dialbackdelay <PPP Dialback Delay>
dialoutlogin <Remote User Login>
dialbackretries <1-10>
Set the modem password and CHAP secret (any extra parameters will be ignored):
set intmodem dialoutpassword
set intmodem chapsecret
Note: It is recommended that the initscript be prepended with 'AT' and include
'E1 V1 x4 Q0' so that the SLC may properly control the modem.
Display settings for the internal modem:
show intmodem