Lantronix SLC 8000

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 383
initscript <Modem Init Script>
localipaddr <negotiate|IP Address>
modemmode <text|ppp>
modemstate
<disable|dialin|dialout|dialback|cbcpserver|cbcpclient|dialondemand|
dialin+ondemand|dialback+ondemand|dialinhostlist>
modemtimeout <disable|1-9999 sec>
nat <enable|disable>
parity <none|odd|even>
remoteipaddr <negotiate|IP Address>
restartdelay <PPP Restart Delay>
service <none|telnet|ssh|tcp>
sshauth <enable|disable>
sshport <TCP Port>
stopbits <1|2>
tcpauth <enable|disable>
tcpport <TCP Port>
telnetauth <enable|disable>
telnetport <TCP Port>
timeoutlogins <disable|1-30 minutes>
usesites <enable|disable>
Description
Configures a currently loaded USB Modem.
Note: It is recommended that the initscript be prepended with 'AT' and include
'E1 V1 x4 Q0' so that the SLC may properly control the modem.
Set the dialout password and CHAP secrets:
set usb modem <U1|U2> dialoutpassword
set usb modem <U1|U2> chapsecret
set usb modem <U1|U2> dodchapsecret
show usb modem
Description
Display product information and settings for any USB modem:
Syntax
show usb modem
VPN Commands
set vpn
Syntax
set vpn