13: Maintenance
SLC™ 8000 Advanced Console Manager User Guide 298
Events Commands
To manage the response to events that occur in the SLC 8000 advanced console manager:
admin events add <trigger> <response>
<trigger> is one of: dpdatadrop, humidlimit, nomodemdial, pingfails,
receivetrap, rpmload or templimit
|receivetrap|templimit|humidlimit|overcurrent|dpdatadrop
<response> is one of:
action <syslog>
action <fwdalltrapseth|fwdseltrapeth> ethport <1|2> nms <SNMP NMS>
community <SNMP Community> [oid <SNMP OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> deviceport <Device Port
# or Name> nms <SNMP NMS> community <SNMP Community> [oid <SNMP
Trap OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> usbport <U1|U2>
nms <SNMP NMS> community <SNMP Community> [oid <SNMP Trap OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> internal modem
nms <SNMP NMS> community <SNMP Community> [oid <SNMP Trap OID>]
action <emailalert> emailaddress <destination email address>
To update event definitions:
admin events edit <Event ID> <parameters>
Parameters
community <SNMP Community>
deviceport <Device Port # or Name>
ethport <1|2>
host <IP Address or Name>
internal modem
nms <SNMP NMS>
oid <SNMP Trap OID>
outlet <Outlet #>
rpm <RPM Id or Name>
threshold <Load Percentage|Current in Amps>
usbport <U1|U2>
emailaddress <destination email address>
To delete an event:
admin events delete <Event ID>
To view events:
admin events show
To Next Page
Loading...
