Lantronix SLC 8000 User Manual

3: Installation
SLC™ 8000 Advanced Console Manager User Guide 44
Battery Replacement
Caution: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Attention: II Y A DANGER D'EXPLOSION S'IL Y A REMPLACEMENT INCORRECT DE LA
BATTERIE. REMPLACER UNIQUEMENT AVEC UNE BATTERIE DU MÊME TYPE
OU D'UN TYPE EQUIVALENT RECOMMANDÉ PAR LE CONSTRUCTEUR.
METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX
INSTRUCTIONS DU FABRICANT.
Caution: DEVICES INSIDE THE EQUIPMENT ARE ELECTROSTATIC -SENSITIVE;
DO NOT HANDLE EXCEPT AT A STATIC FREE WORKPLACE.
Battery Part Numbers
Panasonic BR2032 or equivalent (button cell lithium, non-rechargeable.)
Caution: DO NOT USE BATTERY TYPE CR2032 SINCE IT HAS A LOWER
OPERATING TEMPERATURE RANGE.
DISPOSAL OF USED BATTERIES (from battery data sheet)
 If not in a large quantity, button cell batteries contain so little Lithium that they do not qualify as
reactive hazardous waste. These batteries are safe for disposal in the normal municipal waste
stream.
 If in a large quantity, disposal of button cell batteries should be performed by permitted,
professional firms knowledgeable in Federal, State and local hazardous waste transportation
and disposal requirements.
Caution: RISK OF FIRE, EXPLOSION AND BURNS. DO NOT RECHARGE, CRUSH,
HEAT ABOVE 212°F (100°C) OR INCINERATE.

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm