SLC™ 8000 Advanced Console Manager User Guide 388
Appendix B: Safety Information
Safety Precautions
Please follow the safety precautions described below when installing and operating the SLC
advanced console manager.
Caution: EQUIPMENT IS FOR INDOOR USE ONLY!
Fuse Caution Statement
For protection against fire, replace the power-input-module fuse with the same type and rating.
Pour préserver la protection contre l'incendie, remplacez toujours le fusible du module
d'alimentation électrique par un modèle du même type et de la même capacité.
Ersetzen Sie die Netzteilsicherung nur durch eine Sicherung desselben Typs und derselben
Nennstromstärke um die Gefahr eines Brandes zu vermeiden.
Para proteger la unidad contra el fuego, sustituya el fusible del módulo de entrada de alimentación
por otro del mismo tipo y capacidad.
주의–전원입력모듈퓨즈를교환할때는화재예방을위해형식과정격전압전류가동일
한퓨즈를사용하십시오 .
Предупреждение:Длязащитыотпoжapaзаменяйтeпредохранительблoкa
питаниянaпредохранительтaкогожетипаиcтакойжехaрактериcтикой.
Cover
Do not remove the cover of the chassis. There are no user-serviceable parts inside. Opening
or removing the cover may expose you to dangerous voltage that could cause fire or electric
shock. The exception is access to the internal modem and RTC battery. For these you don't
have to remove the chassis cover, but just the battery/modem door.
Refer all servicing to Lantronix.
Power Plug
When disconnecting the power cable from the socket, pull on the plug, not the cord.
Always connect the power cord to a properly wired and grounded power source. Do not use
adapter plugs or remove the grounding prong from the cord.
Only use a power cord with a voltage and current rating greater than the voltage and current
rating marked on the SLC unit.
The SLC 8000 unit must be connected to a branch circuit provided with 15A or 20A, single
pole circuit breaker.
Install the SLC 8000 advanced console manager near an AC outlet that is easily accessible.
Always connect any equipment used with the product to properly wired and grounded power
sources.
To help protect the product from sudden, transient increases and decreases in electrical
power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
