Lantronix SLC 8000

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 326
LDAP Commands
set ldap
Syntax
set ldap <one or more parameters>
Parameters
state <enable|disable>
server1 <IP Address or Name>
server2 <IP Address or Name>
port <TCP Port>
base <LDAP Base>
bindname <Bind Name>
bindwithlogin <enable|disable>
useldapschema <enable|disable>
adsupport <enable|disable>
filteruser <User Login Attribute>
filtergroup <Group Objectclass>
grmemberattr <Group Membership Attribute>
grmembervalue <dn|name>
encrypt <starttls|ssl|disable>
dataports <Port List>
listenports <Port List>
clearports <Port List>
escapeseq <1-10 Chars>
breakseq <1-10 Chars>
custommenu <Menu Name>
allowdialback <enable|disable>
dialbacknumber <Phone Number>
group <default|power|admin>
permissions <Permission List>
Note: See User Permissions Commands (on page 334) for information on groups and
user rights.
Description
Configures the SLC 8000 advanced console manager to use LDAP to authenticate users who log
in via the Web, SSH, Telnet, or the console port.
set ldap bindpassword
Description
Set the LDAP bind password.
Syntax
set ldap bindpassword