Lantronix SLC 8000 User Manual

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 373
timeoutssh <disable|1-30 minutes> v3security
<noauth|auth|authencrypt>
sshdatadir <netin|netout|both> v3auth <md5|sha>
dsakeys <enable|disable> v3encrypt <des|aes>
webssh <enable|disable> phonehome <enable|disable>
smtpserver <IP Address or Name> phoneip <IP Address>
smtpsender <Email Address> termbufsize <Number of Lines>
Description
Configures services (system logging, SSH and Telnet access, SSH and Telnet timeout, SNMP
agent, email [SMTP] server, and audit log.)
set services v3password
Description
Set SNMP v3 read-only, read-write and trap password/passphrase.
Syntax
set services v3password|v3phrase|v3rwpassword|v3rwphrase|v3trappassword
|v3trapphrase
show services
Syntax
show services
Description
Displays current service settings.
SLC Network Commands
set slcnetwork
Syntax
set slcnetwork <one or more parameters>
Parameters
add <IP Address>
delete <IP Address>
search <localsubnet|ipaddrlist|both>

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm