Lantronix SLC 8000

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 357
Rename a group:
set groups rename <Group Name> newname <New Group Name>
Delete a group:
set groups delete <Group Name>
Show one or more groups:
show groups [name <Group Name>] members <enable|disable>
Host List Commands
set hostlist add|edit <Host List Name>
Syntax
set hostlist add|edit <Host List Name> [<parameters>]
Parameters
name <Host List Name> (edit only)
retrycount <1-10>
Default: retrycount=3, auth=enable.
auth <enable|disable>
Description
Configures a prioritized list of hosts to be used for modem dial-in connections.
set hostlist add|edit <Host List Name> entry
Syntax
set hostlist add|edit <Host List Name> entry <Host Number>
[<parameters>]
Parameters
host <IP Address or Name>
protocol <ssh|telnet|tcp>
port <TCP Port>
escapeseq <1-10 Chars>
Description
Adds a new host entry to a list or edit an existing entry.