Lantronix SLC 8000

10: Remote Power Managers
SLC™ 8000 Advanced Console Manager User Guide 206
RPM Commands
set rpm add
Syntax
set rpm add <RPM Name>
Description
Adds an RPM to be managed (prompts will guide selection of RPM vendor and model).
set RPM command
Syntax
set rpm command <RPM Id or Name>
outlet <all|Outlet # or List> state <on|off|cyclepower>
Description
Sends a command to control one or more outlets on an RPM.
Syntax
set rpm command <RPM Id or Name> device <reboot|shutdown>
Description
Sends a command to control an RPM device.
Syntax
set rpm command <RPM Id or Name> beeper <mute|enable|disable>
Description
Sends a command to control an RPM beeper.
set rpm delete
Syntax
set rpm delete <RPM Id or Name>
Description
Deletes an RPM.