Lantronix SLC 8000

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 366
show network ipv6
Syntax
show network ipv6
Description
Displays all ipv6 settings.
show network sfp
Syntax
show network sfp
Description
Displays network port 1 and port 2 SFP diagnostics.
show network all
Syntax
show network all
Description
Displays all network settings.
NFS and SMB/CIFS Commands
set nfs mount
Syntax
set nfs mount <one or more parameters>
Parameters
locdir <Directory>
mount <enable|disable>
remdir <Remote NFS Directory>
rw <enable|disable>
Enables or disables read/write access to remote directory.
Description
Mounts a remote NFS share.
The remdir and locdir parameters are required, but if they have been specified previously, you
do not need to provide them again.