Lantronix SLC 8000 User Manual

12: User Authentication
SLC™ 8000 Advanced Console Manager User Guide 229
To view the rights of the currently logged-in user:
show user
NIS
The system administrator can configure the SLC advanced console manager to use NIS to
authenticate users attempting to log in to the SLC unit through the Web, SSH, Telnet, or the
console port. If NIS does not provide port permissions, you can use this page to grant device port
access to users who are authenticated through NIS.
All NIS users are members of a group that has predefined user rights associated with it. You can
assign additional user rights that are not defined by the group.
To configure the SLC unit to use NIS to authenticate users:
1. Click the User Authentication tab and select the NIS option.
Figure 12-5 User Authentication > NIS

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm