Lantronix SLC 8000 User Manual

13: Maintenance
SLC™ 8000 Advanced Console Manager User Guide 288
Figure 13-8 Maintenance > Diagnostics
4. To view a report, click the link for that report.
5. To email this report, follow the instructions in Emailing Logs and Reports (on page 293).
Diagnostic Commands
The following CLI commands correspond to the web page entries described above.
To display the Address Resolution Protocol table (for IPv4) or the Neighbor table (for IPv6)
for mapping IP Addresses to hardware addresses:
diag arp|arp6 [email <Email Address>]
Note: You can optionally email the displayed information.
To display a report of network connections:
diag netstat [protocol <all|tcp|udp>] [email <Email Address>]
Note: You can optionally email the displayed information.

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm