Lantronix SLC 8000 User Manual

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 328
listenports <Port List>
custommenu <Menu Name>
uid <User Identifier>
group <default|power|admin|Custom Group Name>
passwordexpires <enable|disable>
permissions <Permission List>
Note: See User Permissions Commands (on page 334) for information on groups and
user rights. Remove Escape & Break Sequences for users making raw binary connections
to Device Ports.
Description
Configures local accounts (including sysadmin) who log in to the SLC 8000 advanced console
manager by means of the Web, SSH, Telnet, or the console port.
set localusers allowreuse
Syntax
set localusers allowreuse <enable|disable>
Description
Sets whether a login password can be reused.
set local users complexpasswords
Syntax
set localusers complexpasswords <enable|disable>
Description
Sets whether a complex login password is required. Complex passwords require at least one
uppercase character, one lowercase character, one digit, and one non-alphanumeric character.
set localusers state
Syntax
set localusers state <enable|disable>
Description
Enables or disables authentication of local users.
set localusers delete
Syntax
set localusers delete <User Login>

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm