15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 349
termstr <Termination String>
timeoutlogins <disable or 1-30 minutes>
toggledtr <enable|disable>
tokenaction <List of none,log,trap,email,string,power>
tokendatadetect <enable|disable>
tokenstring <Regex String>
tokentrigger <bytecnt|charstr>
usblogging <enable|disable>
usbmaxfiles <Max # of Files>
usbmaxsize <Size in Bytes>
usbport <U1|U2|SD>
usbvbus <enable|disable>
usesites <enable|disable>
viewportlog <enable|disable>
Description
Configures a single port or a group of ports.
Set the modem password and CHAP secrets (any extra parameters will be ignored):
set deviceport port <Device Port # or List or Name> dialoutpassword
set deviceport port <Device Port # or List or Name> chapsecret
set deviceport port <Device Port # or List or Name> dodchapsecret
Reset a device port, terminating and restarting all relevant connections:
set deviceport port <Device Port # or List or Name> reset
Configure up to 4 managed power supplies for device connected to a device port:
set deviceport port <Device Port # or Name> managepower
Reset a device port, terminating and restarting all relevant connections:
set deviceport port <Device Port # or List or Name> reset
Note: A group of device ports can be configured by specifying a comma-separated list of
ports (i.e., '1-4,8,10-12') or 'ALL'. Remove breakseq for Device Ports connected to raw
binary connections.The logging level for the Device Ports log must be set to 'Info' to view
Syslog entries for Device Port logging. It is recommended that the 'initscript' be
prepended with 'AT' and include 'E1 V1 x4 Q0' so that the SLC may properly control
the modem.
set deviceport global
Syntax
set deviceport global <one or more parameters>
Parameters
sshport <TCP Port>
telnetport <TCP Port>
tcpport <TCP Port>
To Next Page
Loading...
Need help?
General
Weight and Dimensions
