Lantronix SLC 8000 User Manual

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 353
Parameters
ethport <1|2>
protocol <tcp|udp|icmp|esp>
host <IP Address or Name>
numpackets <Number of Packets>
verbose <low|medium|high|disable>
Description
Displays all network traffic, applying optional filters. This command is available in the CLI but not
the web.
diag perfstat
Description
Display performance statistics for an Ethernet Port or Device Port, averaged over the last 5
seconds. Must specify an Ethernet Port or Device Port.
Syntax
diag perfstat [ethport <1|2>] [deviceport <Device Port # or Name>]
diag ping|ping6
Description
Verifies if the SLC can reach a host over the network.
diag ping|ping6 <IP Address or Name> [<parameters>]
Parameters
count <Number Of Times To Ping>
packetsize <Size In Bytes>
ethport <1|2>
Defaults: count=5, packetsize=64
diag sendpacket host
Description
Generate and send Ethernet packets.
Syntax
diag sendpacket host <IP Address or Name> port <TCP or UDP Port Number>
[string <Packet String>] [protocol <tcp|udp>]
[count <Number of Packets>]

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm