Lantronix SLC 8000 User Manual

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 369
set RPM command
Syntax
set rpm command <RPM Id or Name>
outlet <all|Outlet # or List> state <on|off|cyclepower>
Description
Sends a command to control one or more outlets on an RPM.
Syntax
set rpm command <RPM Id or Name> device <reboot|shutdown>
Description
Sends a command to control an RPM device.
Syntax
set rpm command <RPM Id or Name> beeper <mute|enable|disable>
Description
Sends a command to control an RPM beeper.
set rpm delete
Syntax
set rpm delete <RPM Id or Name>
Description
Deletes an RPM.
set rpm driver
Syntax
set rpm driver <RPM Id or Name> action restart
set rpm driver <RPM Id or Name> action debug [level <1|2|3>]
set rpm driver <RPM Id or Name> action show
set rpm driver <RPM Id or Name> action viewoutput [email <Email Address>]
[display <head|tail>] [numlines <Number of Lines>]
Description
Control and debug the RPM driver if the driver is not properly communicating with the PDU or
UPS: restart the driver; restart the driver with debug output to a file; show the running driver; view
and email the driver debug output.

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm