Cold plate assembly cable routing
Connect the cold plate assembly pump cables to the retimer assembly as illustrated.
Figure 68. Cold plate assembly pump cables to the retimer assembly cable routing – Configuration G
From To
Retimer assembly
1 Cold plate assembly pump
cable connector 1
Cold plate assembly
1 Cold plate 1
2 Cold plate assembly pump
cable connector 2
2 Cold plate 2
3 Cold plate assembly pump
cable connector 3
3 Cold plate 3
4 Cold plate assembly pump
cable connector 4
4 Cold plate 4
120 ThinkSystem SR670 V2 Maintenance Manual
To Next Page
Loading...
