Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-BXei6L6c05osQVLt4w5XYx
• Youku: https://list.youku.com/albumlist/show/id_59636529
Procedure
Step 1. Install the GPU distribution board.
a.
Align the nine screw holes on the GPU distribution board with the standoffs on the chassis.
b.
Fasten the nine screws to secure the GPU distribution board to the chassis.
Note: The illustration shows the Four PCIe x16 slot PCIe distribution board.
Figure 192. Installing a GPU distribution board — 4-DW GPU Model
Chapter 4. Hardware replacement procedures 259
To Next Page
Loading...
