1
SXM GPU board handle
Figure 238. Removing the SXM GPU board
After you finish
• Install a replacement unit. See “Install the SXM GPU board” on page 305.
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the SXM GPU board
Follow instructions in this section to install the SXM GPU board.
About this task
Important: Removing and installing this component requires trained technicians. Do not attempt to remove
or install it without proper training.
Note: Make sure you have an alcohol cleaning pad available.
Attention:
• Read “Installation Guidelines” on page 121 and “Safety inspection checklist” on page 122 to ensure that
you work safely.
• Hold the long sides of the SXM GPU board with two hands while removing the new GPU board from the
package box.
Chapter 4. Hardware replacement procedures 305
To Next Page
Loading...
