Lenze 8400 HighLine C Series - 14.2.11 LS_DisFree_p; 14.2.12 LS_DriveInterface

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 1077
8400 HighLine | Parameter setting & configuration
Function library
System blocks | LS_DisFree_p
14.2.11 LS_DisFree_p
This system block displays 8 arbitrary position signals of the application on display codes.
Inputs
Parameter
14.2.12 LS_DriveInterface
Interface to internal device control.
Identifier
Data type
Information/possible settings
dnDis1_p ... dnDis8_p
DINT
Inputs for arbitrary position signals of the application
Parameter Possible settings Info
C00483/1...8
-2147483647 Incr. 2147483647 Display of the position signals which
are applied at the
dnDis1_p ... dnDis8_p inputs
GQ'LVBS
GQ'LVBS
GQ'LVBS
GQ'LVBS
GQ'LVBS
GQ'LVBS
GQ'LVBS
GQ'LVBS
&
&
&
&
&
&
&
&
/6B'LV)UHHBS
 For a detailed description see main chapter "Device control (DCTRL)":
Internal interfaces | "LS_DriveInterface" system block
( 91)
efesotomasyon.com - Lenze