8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00186
626 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
C00186
C00187
C00188
C00189
Parameter | Name:
C00186 | Max. no. of AutoFailReset procedures
Data type: UNSIGNED_8
Index: 24389
d
= 5F45
h
Maximum number of "AutoFailReset" procedures
AutoFailReset function
Setting range (min. value | unit | max. value) Lenze setting
1164
; Read access ; Write access CINH PLC STOP No transfer COM MOT Scaling factor: 1
Parameter | Name:
C00187 | Current AutoFailReset procedures
Data type: UNSIGNED_8
Index: 24388
d
= 5F44
h
Data of the current number of "AutoFailReset" procedures
AutoFailReset function
Display range (min. value | unit | max. value)
0 16
; Read access Write access CINH PLC STOP No transfer COM MOT Scaling factor: 1
Parameter | Name:
C00188 | Configuration AutoFailReset
Data type: UNSIGNED_8
Index: 24387
d
= 5F43
h
Setting which error messages are to be reset automatically.
AutoFailReset function
Selection list (Lenze setting printed in bold) Info
0Off No automatic error message reset
1 Fault + TroubleQSP Error messages with the response "Fault" and
"TroubleQSP" are reset automatically
2 WarningLocked Error messages with the response "WarningLocked" are
reset automatically
3 All locking All "locking" error messages are reset automatically
; Read access ; Write access CINH PLC STOP No transfer COM MOT Scaling factor: 1
Parameter | Name:
C00189 | Resp. too frequent AutoFailReset
Data type: UNSIGNED_8
Index: 24386
d
= 5F42
h
Response to exceeding the maximum number of "AutoFailReset" procedures set in C00186.
AutoFailReset function
Selection list (Lenze setting printed in bold)
0 No Reaction
1Fault
2Trouble
3 TroubleQuickStop
4 WarningLocked
5 Warning
6 Information
; Read access ; Write access CINH PLC STOP No transfer COM MOT Scaling factor: 1
efesotomasyon.com - Lenze
To Next Page
Loading...
