Lenze 8400 HighLine C Series - C01086 | LS_WriteParamList: WriteValue_1; C01087 | LS_WriteParamList: WriteValue_2; C01088 | LS_WriteParamList: WriteValue_3; C01089 | LS_WriteParamList: WriteValue_4

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 761
8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C01086
C01086
C01087
C01088
C01089
Parameter | Name:
C01086 | LS_WriteParamList: WriteValue_1
Data type: INTEGER_32
Index: 23489
d
= 5BC1
h
As of version 04.00.00
LS_WriteParamList
FB: Parameter values - value set 1
Setting range (min. value | unit | max. value)
-2147483647 2147483647
Subcodes Lenze setting Info
C01086/1 0 Parameter values - value set 1
• Parameter values for the parameters defined in
C01085
/1 ... 32.
C01086/...
C01086/32
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01087 | LS_WriteParamList: WriteValue_2
Data type: INTEGER_32
Index: 23488
d
= 5BC0
h
As of version 04.00.00
LS_WriteParamList
FB: Parameter values - value set 2
Setting range (min. value | unit | max. value)
-2147483647 2147483647
Subcodes Lenze setting Info
C01087/1 0 Parameter values - value set 2
• Parameter values for the parameters defined in
C01085
/1 ... 32.
C01087/...
C01087/32
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01088 | LS_WriteParamList: WriteValue_3
Data type: INTEGER_32
Index: 23487
d
= 5BBF
h
As of version 04.00.00
LS_WriteParamList
FB: Parameter values - value set 3
Setting range (min. value | unit | max. value)
-2147483647 2147483647
Subcodes Lenze setting Info
C01088/1 0 Parameter values - value set 3
• Parameter values for the parameters defined in
C01085
/1 ... 32.
C01088/...
C01088/32
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01089 | LS_WriteParamList: WriteValue_4
Data type: INTEGER_32
Index: 23486
d
= 5BBE
h
As of version 04.00.00
LS_WriteParamList
FB: Parameter values - value set 4
Setting range (min. value | unit | max. value)
-2147483647 2147483647
Subcodes Lenze setting Info
C01089/1 0 Parameter values - value set 4
• Parameter values for the parameters defined in
C01085
/1 ... 32.
C01089/...
C01089/32
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
efesotomasyon.com - Lenze