8400 HighLine | Parameter setting & configuration
Technology applications
TA "Actuating drive speed"
286 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
Port block LP_MciOut
bState_B0 - -
...
bState_B15
wState LA_NCtrl.wDriveControlStatus Status word of the controller (based on DSP-402)
• See the wDeviceStatusWord status word
for the bit
assignment of the drive interface.
bOut2_B0 - -
...
bOut2_B15
wOut2 LA_NCtrl.nMotorSpeedAct_a Actual speed value
• Scaling: 16384 ≡ 100 % rated speed (C00011
)
wOut3 LA_NCtrl.nMotorSpeedSet_a Resulting overall setpoint
• Scaling: 16384 ≡ 100 % rated speed (C00011
)
wOut4 - -
...
wOut16
Port Assignment Info
efesotomasyon.com - Lenze
To Next Page
Loading...
